Ruijie
Last updated
Last updated
Social WiFi has been tested and is proven to work on the following configurations:
ReyeeOS 2.283 and higher
EG105G-V3, EG210G-V3, EG209GS, EG305GH-E, EG310GH-E, EG1510XS (this also applies for POE models of the devices)
An example working setup consists of an Access Point RAP2260(G) and a gateway EG209GS.
Please note that a gateway is necessary to configure the captive portal on Ruijie
In the Ruijie Cloud, go to the Device Config -> SSID.
Click on + Add SSID.
Configure as follows:
SSID | *Your SSID name* |
Purpose | General |
Frequency Band | Leave default |
Encryption Option | Do Not Encrypt |
Encryption Method | OPEN (Open) |
Click OK.
After configuring the WiFi network, go to the Auth & Accounts -> Captive Portal.
Click on Add Captive Portal.
Now, click on External and Edit in the "Auth Server Method".
In the pop up window, click on Add.
Configure as follows:
Server Group Name | socialwifi |
Server IP Address | 35.205.62.147 |
Server Name | socialwifi |
Authentication Port | 31812 |
Accounting Port | 31813 |
Shared Key | RADIUS Secret is available in Access Points tab of the Social WiFi Panel |
Match Order | 0 |
Click OK.
After configuring the server , configure the Captive Portal page as follows:
Policy Name | socialwifi |
Policy Mode | External |
Authentication Device | Reyee Gateway |
Auth Protocol | WISPr |
Network | Select your network used for the SSID (Default is VLAN233) |
Auth Server URL | http://login.socialwifi.com |
Request Parameters | Edit -> Ruijie -> Ok |
Auth Type | RADIUS |
RADIUS Encryption Method | PAP |
Auth Server Group | socialwifi |
Accounting Server Group | socialwifi |
Click OK.
Go to Auth & Accounts -> Allowlist.
In the Pre-auth Allowlist tab click on Add. Click on "+" to add multiple domains at once. Copy and paste each domain:
Mandatory
Facebook remarketing pixel
Google remarketing tag
Google login
Facebook login
Twitter login
LinkedIn login
Click OK.
Go to Devices and copy the MAC address of the your EG. Screenshot for reference below.
Now, switch to Social WiFi Panel, go to Access Points tab, click the Add button and paste the MAC addresses of your Ruijie Gateway. Click Create.
Connect with the WiFi network. You should see a login page. Go through the login process and, once finished, you should have internet access. You should see first connections and authorizations in the Social WiFi Panel’s statistics section.
