This article describes the configuration of Ruckus Unleashed. Installation guides for other Ruckus equipment:
Ruckus VSZ/VSG
Ruckus Zone Director

1. Accessing the device’s administration panel

Log in to your Access Point by opening your web browser and typing in its IP address.
By default: 192.168.0.1

2. Device configuration

2.1 Admin&Services section → Services → AAA Services

Press “Create New” in the “Authentication Servers” tab and add two new servers:

2.1.1 Authentication
  • Name: swauth
  • Type: RADIUS
  • Auth Method: PAP
  • IP Address: 35.205.62.147
  • Port: 31812
  • Secret: Radius Secret available in Access Points tab of the Social WiFi Panel
  • Confirm Secret: Re-enter the above
2.1.2 Acccounting
  • Name: swaccount
  • Type: RADIUS Accounting
  • IP Address: 35.205.62.147
  • Port: 31813
  • Shared Secret: Radius Secret available in Access Points tab of the Social WiFi Panel
  • Confirm Secret: Re-enter the above

2.2 Hotspot Configuration: Admin&Services section → Services → Hotspot Services

Press “Create New” and configure as such:

2.2.1 General tab:
  • Name: socialwifi
  • WISPr Smart Client Support: Enabled
  • Smart Client HTTP Secure: HTTPS
  • Login Page: https://login.socialwifi.com/
  • Start Page: redirect to the following URL – https://login.socialwifi.com/redirect/
2.2.2 Authentication tab:
  • Authentication Server: swauth (choose from the list)
  • Accounting Server: swaccount (choose from the list)

Walled Garden tab (press “Create New” and input the entries below one by one):

sw-login.com
socialwifi.com
*.socialwifi.com
accounts.google.com
ssl.gstatic.com
fonts.google.com
facebook.com
*.facebook.com
*.fbcdn.net
linkedin.com
*.linkedin.com
*.licdn.com
*.licdn.net
twitter.com
*.twitter.com
*.twimg.com

2.3 Wireless

Click on the WiFi Networks section and press “Create”.

Configure with the following settings:

  • Name: Type in the name of your WiFi network (SSID)
  • Usage Type: Hotspot Service
  • Authentication Method: Open (unless the network is supposed to be password-protected)
  • Hotspot Services: socialwifi (choose from the list)

3. Adding the device to Social WiFi Panel

In order to add a device to Social WiFi platform:

  • Access your account in the Social WiFi Panel.
  • Choose the correct venue to which you would like to add the device.
  • In the “Access Points” tab, press “Add” (upper right corner), paste the MAC address of your Access Point (adding a name is optional) and click “Create”.

4. Test the service

Tags

Comments are closed